At 10psi, the engine should be rebuilt or checked by another oil pressure
gauge. Look at a Bently manual. Oil pressure should be very much above 10!
Mike C
----- Original Message -----
From: "Paul Van Wig" <pvanwig@charter.net>
To: <spridgets@Autox.Team.Net>
Sent: Sunday, April 29, 2007 6:16 PM
Subject: RE: We tight engine rebuilding
> Our little motors measure the oil presser off of the crank bearing(center
> I
> think) not of the oil galley like most cars. So low is normal 10psi at
> idle
> when warm good for a 948 & 1098. a little higher for a 1275 if I remember
> right.
>
> Paul Van Wig
|