Judsons are cool, period pieces.
But, if you're making manifolds you should think about grabbing a M45
Eaton on ebay. They suck in the back and blow out the side. Put a
good HIF6 behind it and away you go.
I'll sell you my NEW Eaton M24 for $400 if you want. It is very small
and supposedly good for applications around 1L and 100 HP. I was
going to make an adapter plate and use a single HIF manifold(add $100
if you want the manifold).
I've been keeping my eyes open for small blowers off and on for a
while and I've never seen a Judson SP-1 for under $600 in any
condition. Maybe at Carlisle?
Used Eaton Roots type blowers are easy to find now because so many are
upgrading to Lysholm types.
|