Re: Transmission question

[Frank Clarici <spritenut@comcast.net>]

Try pumping it up, if it goes into gear with a few pumps, it's air in 
the line.
A quick fix (temp) for a short slave rod is to put a 5/16 nylock or 
round headed nut on the end of the rod. and see it that helps.
That will give you about a 1/4" or so more throw. But make sure you are 
not overthrowing the release bearing.
Try pumping it up first, it that doesn't work, try the nut.


-- 
Frank Clarici
Toms River, NJ