Re: Pessimistic gas gauge

[Frank Clarici <spritenut@comcast.net>]

James Pickard wrote:
>   Is there any way to calibrate or repair this thing, 

I have successfully calibrated bum gas gauges by repositioning the 
needle. Yes bend that sucker to where you want it to read ;)
That is if the sending unit is OK which you can bench test with 12 
volts, a good gas gauge and a bunch of wires.
Ground the gauge and sender, power the gauge, feed the gauge to the 
sender and move the float up and down. Watch the needle.




-- 
Frank Clarici
Toms River, NJ