spridgets
[Top] [All Lists]

Re: Help Please, brake line leak

To: "Jack Laird" <jlaird237@cox.net>, "spridgets net"
Subject: Re: Help Please, brake line leak
From: "Peter C." <nosimport@mailbag.com>
Date: Thu, 18 Jan 2007 08:48:55 -0600
Jack,
         The line is actually 14" long. 3/8-24 male, and 3/8-24 
female both with single, or "bubble" flares.
Peter C.
====
At 07:05 PM 1/17/2007, Jack Laird wrote:

>Under close, and I meen very close instpection I have found the leak in the
>brake line. It looks like someone sometime kinked the passanger side brake
>line at the fitting where it screws into the three way brass fitting. Not a
>break but a crack big enough that it leaks like a stuck pig.
>
>So guess what? I need that small tube. Should be the same on a Sprite or a
>Midget. Again the tube that goes from the brass three way fitting around by
>the shock to the flex hose on the passanger side, only about 9 inches long,
>twisted like a pigs tail, and has a regular male brake line fitting on one end
>and a much larger female fitting on the other.
>
>As always help appreciated.




<Prev in Thread] Current Thread [Next in Thread>