I sort of do it backwards. I open the bonnet and loosen all four bolts. I
then almost close the bonnet and pull it up in the back. I then can get
wrench under the back end of the bonnet and take out all 4 bolts. At this
point the bonnet is down and unbolted. Pick it and walk away. Job done.
On 1/6/07, Larry Macy <lmacy@phillymgclub.com> wrote:
>
> Just loosen all the bolts, leave
> the ones in the support for last, put a blankey twixt the bonnet and
> cowl, pull the support and off it comes. Only weighs about 30 or 40
> lbs. Easy for one to do.
|