I went through this experience this past spring. Tapered drift pins are
your friend!
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
From: john.dagostino@comcast.net
Sent: 10/3/2006 10:26:39 AM
To: macy@bbl.med.upenn.edu;macy@bbl.med.upenn.edu;bmwwxman@gmail.com
Cc: spridgets@autox.team.net
Subject: Re: Spridget Windscreen Troubles
I had ths same problem on my car. It took a lot of pushing, pulling,
cursing and the use of a drift pin in the holes to pry down the
windshield.
-------------- Original message --------------
From: "Larry B. Macy, Ph.D."
> Sit on it??
>
> Larry
>
> On Oct 3, 2006, at 09:59 AM, Jim Johnson wrote:
>
> > I'm trying to replace the windscreen on my MKIII Midget with one I
got
> > from a donor parts car. I have replaced the rubber fittings with
new.
> > I am unable to get the two end posts far enough down into the holes
in
|