Joe Lansing wrote:
> What is the prevailing wisdom regarding rebuilding
> brake calipers? I've accomplished Step 1 where you use
> 120 PSI of air to shoot the pistons across the shop
> and disperse brake fluid all over clean clothes...
> what is Step 2 -
Step 1...Put on dirty clothes ;) Hold the piston with a rag so it
doesn't shoot across the shop.
The seals sort of just pry out with a screwdriver under the metal
retainer. Sometimes a sharp pick is needed to pry out the rubber seal.
--
Frank Clarici
Toms River, NJ
|