Adrian Jones wrote:
> Hi Folks,
>
> I'm about to swap one rear spring set with the other side.
> Apparently, the rear axle needs supporting and the car itself needs jacks
>under it before the springs can be removed.
> I'm not sure where to put the jack stands that support the car - there
>doesn't seem anywhere that looks strong enough.
Support the car on a board across the floor pan in front of the spring
perches or 2 jack stands inboard at the tunnel/rear scuttle
Use a floor jack under the pumpkin because you will need adjust it up
and down when removing the springs.
--
Frank Clarici
Toms River, NJ
|