But 1/4-28 for the captive nuts on the sheetmetal.
-=Chris
<-----Original Message----->
From: Frank Clarici
Sent: 4/10/2006 7:07:57 PM
To: spritenut@comcast.net
Cc: bmwwxman@gmail.com;type79@ix.netcom.com;spridgets@autox.team.net
Subject: Re: Repro Radiator Bolts
Frank Clarici wrote:
> Jim Johnson wrote:
>
>
>> I wasn't too clear there, was I? Four total bolts, two of each
>> length, same thread on all. They are smaller than the 5/16-24 that
>> held the original radiator in so I'm guessing maybe 1/4-28?
>
>
> 1/4-28 is original.
>
Oops. Original to the down flow. 5/16 is for the cross flow or 10/32s on
the sheetmetal of a cross flow.
--
Frank Clarici
.
|