At 12:08 PM 1/27/2006, roger cotting wrote:
>Rivergate offersa rebuild kit that includes bearings, syncros, seals
>and such. I'm sure Paul A offers the same. You could talk to Paul A
>or Rivergate about other parts.
> Roger Cotting
>
>Mike Maclean <macleans@earthlink.net> wrote:
>You guys remember last year I was having problems with my Datsun 210
>transmission installation? I broke-in the cam at 2000 rpm for 20
>minutes (5-10 minutes at a time) with the trans in neutral before
>filling the transmission with oil. Some on the list said it should
>not hurt it because there should be a film of oil on a the parts of a
>drained transmission. Others pointed to stuck synchros or out of
>place shifter forks. Well, I talked to a transmission re-builder
>here in San Bernardino that came highly recommended. He seemed to be
>quite familiar with these transmissions and told me to start looking
>for a new one. He said all the gears were spinning on the main shaft
>in neutral and I welded the first gear to the shaft with no oil in
>the trans. He also said start looking for another transmission
>because any parts that would have to be replaced would come from
>another used transmission as there are no replacement parts for these
>transmissions, except bearings and such. Anyone have a 210 trans for sale?
>Mike MacLean
>60 Sprite (without a transmission)
>56 BN2
That's all well and good, but the parts that I need are gears and
shafts and only can be obtained from another used
transmission. Might as well just source another.
Mike
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.23/243 - Release Date: 1/27/2006
|