Hi Bud,
Definitely in the cylinder head. You actually meas. engine temp. there. No
way in the radiator, there if you lose a hose or spring a leak you are
measuring steam or air which will most likely be less than your engine that
is about to expire without you knowing it.
Mike C
----- Original Message -----
From "Bud Pazur" <bpazur at excel.net>
To: <spridgets@autox.team.net>
Sent: Thursday, February 17, 2005 2:11 PM
Subject: 1275 Questions
> 1275 people -
>
> Two questions about the 1275 I am installing in my street Bugeye in place
> of
> the 948:
>
> I have a choice of two locations for the water temperature sensor - in the
> radiator or in the block. Which is preferred?
>
> I have a vent from the timing cover canister, and one from the valve
> cover.
> Can I vent these both into the carb filter using a T-fitting (I am using
> old
> BAP/GEON foam element filters - the front filter has a 1/2" vent tube)?
>
> Thanks
>
> Bud Pazur
|