Hi All,
I removed the intake from my 1500 yesterday, took 3 hours. The 2 bolts on
the under side were
Studs with those long threaded nuts you use to couple all thread rod
together. About 11/4" long.
Surely this not what should be on there??? In order to get these loose I had
to bend a 9/16"
Open end wrench into an L shape (would still lay flat on the bench). Is
there a special wrench for these bolts or do I have the wrong nuts. I know
the service manual will most likely tell me this, I have one on order but
have not received it yet.
Thanks in advance.
Skip
|