Got the pumpkin nuts off, but the pumpkin will slide out only
about 1/4" then binds. The left side axle will slide out no more than
about 1/4" then binds. No joy either way!
If I tap a rod thru the axle from the right side, am I certain not to be
banging on the pinion gear or its carrier??
thanks
chuck
Wm. Severin Thompson wrote:
>
> If it broke at the splined end, in the center of the diff, you usually
> have to get something like a long 1/4" steel rod to pound them out
> from the other side (remove the other side axle). I used the rod from
> a lawn chair once at the track...
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|