(setup for chuck here) - with or without sparkplugs?
--- Charles Christ <cfchrist@earthlink.net> wrote:
> a science class or scientific supply house.
> the tube is referred to as a burette(sp.?) tube. a
> tiny on / off valve at
> the bottom. use a piece of plexiglass with a hole
> drilled in it in the
> center. smear a liberal amount of vaseline around
> the cylinder sealing area
> on the head and seat the plexiglass on the head
> using the grease as the
> sealer. use either colored water or automatic trans
> fluid. level head
> upside down and mark fluid level in tube at start.
> fill up combustion
> chamber with fluid untill it is "full" with no air
> pockets showing under the
> plexiglass. take level measurement on tube .
> subtract new level from
> starting level in tube and *drum roll please*...you
> just CC'd a comnbustion
> chamber!
__________________________________
The New Yahoo! Shopping - with improved product search
|