don't try that one with a Honda civic...engines spin the other way and you
break the bolt, ask me how I know that....
-----Original Message-----
From Bill L [mailto:pythias at pacifier.com]
Sent: Sunday, October 05, 2003 7:28 PM
To: Martin Cooper
Cc: spridgets
Subject: Re: removing the pully nut
Hello Martin,
this is crude, but....
put your 1 5/16" box end wrench on the nut, block the other end
with a piece of wood against the fender well, and hit the
starter! .. preferably with the coil wire disconnected.
--
Best regards,
Bill mailto:pythias@pacifier.com
"66 Sprite
|