> 66Sprite wrote:
> > How does one go about removing the roll-up window mechanism from the
inside
> > of the doors (65 thru 68 Spridgets)?
>
> Remove the wing window complete with frame, 2 bolts on the inside top
> edge of the door, 2 nuts under the frame, and a funky clip way down low
> on the frame.
> Next remove all the window mechanism bolts from the door, if you have
> the chrome window hanfle, push in on the chrome spring loaded bezel and
> drop out the pin holding the handle on, be careful as it is just help in
> by the spring pressure of the bezel. Once everything is undone, the
> window can be slid off the track with some choice words and all of a
> sudden it's off, lift it out and the mechanism can be fished out of the
> door in a similar manor.
> It's easier to do than to explain, it just sort of pops out after you
> fiddle with it.
How about the tough questions now? What do you have to do to get it all back
together and functional? I want to know before I try to replace that wing
window.
David Lieb
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive
|