Would anybody know how to wire an aftermarket self contained 4 way
hazard system to a Spridget?
I have a NOS Yankee brand self contained hazard switch with a pull knob
that lights up red and a flasher plugged into the back.
The hot wire is red, the switch gets grounded, but there are 4 yellow
wires. My best guess is 1 goes to the green/red signal wire, another to
the green/white signal wire, and that leaves 2 wires left.
Like I said, all 4 are yellow, no stripes, and no instructions with the
old switch.
Once I install the hazard warning system, my new project will be
complete. As of now, it's only 99 & 44/100% finished.
And yes, I installed a spare axle under the right inner fender. It's
powdercoated ;)
--
Frank Clarici
Toms River, NJ
5 British cars on the road
http://www.exit109.com/~spritenut
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|