Re: Finding TDC on 1275?

> So if you climb under and line up the timing mark, The rotor will be
> pointing to the #1 plug wire on the cap.

Or, of course, it could be 180 degrees out and be pointing at #4. You might
want to pop the valve cover and make sure whether #1 or #4 has both valves
closed to be sure.
David Lieb
RWA Midgets

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets