Use a really long pair of bolts, and screw the bottom plate up with the long
bolts, compressing the springs as you go. Once the plate is flush with the
A-arm, use 2 short bolts on the other two holes. Once snug, remove the long
bolts, and replace with two more short ones.
quick and easy.
-------Original Message-------
From cummi018 <cummi018 at bama.ua.edu>
Sent: 05/13/03 11:06 AM
To: spridgets@autox.team.net
Subject: Coil spring reinstall
>
> Hi everyone,
I'm back on the list after having some email problems a few months back.
Hope
I didn't miss too much.
I'm reinstalling my rebuilt a-arms I got a few months back. Is there a
trick
to getting the coil springs back in place? Frank once suggested kicking
them
in place, but I don't see that happening.
Thanks for the help.
Regards,
Glenn Cummins
'74 Midget
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|