Jim,
After you get the plug out, and I wish you luck, get a replacement
throttle disc from a pre-emission carb, rather than solder a penny to the
butterfly.
Peter C
==
At 09:46 PM 4/23/2003, Jim Rogers wrote:
>Per David Anton's (APT) suggestion ( & per Vizard's book) I had cut off
>the overrun valve on the throttle disc & soldered (obviously not well
>enough) the remaining valve disc (bronze, about 3/8" dia)
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|