I definitely come down on the hydraulic jack
method. Used that when I rebuilt the front end
on my '72. Worked a treat. Had the car on jack stands,
and used the trolley jack to lower the wishbone
slowly, releasing the spring.
chuck (no, not that Chuck!)
> To: spridgets@autox.team.net
> Subject: Coil spring removal
>
>
> I am going to be renewing the wishbone bushings and am wondering about the
> best way to remove the springs? Should I do the long bolt method or can it
> be done using a hydralic jack?
> TIA,
> Jim
> 79 Midget
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|