>I've just rebuilt the carb.
> The latter suggests that you are running way too lean, for whatever
reason.
> Try adjusting the mixture screw in till it just seats, then reverse it for
2
> 1/2 turns. Hook up a dwell tach, start her up, and adjust the screw in
> (clockwise) till the engine stumbles, then back out (counterwise) till it
> stumbles again, then back to the highest revs. Oh--be sure to set your
> timing first.
>
> If it is not the mixture screw, then perhaps the jets are blocked or the
> floats need setting. Are the carbs dirty? Need overhauling? Shafts
loose
> and allowing too much air to be sucked in?
>
> --DAvid C.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|