In a message dated 11/27/01 12:46:19 AM Eastern Standard Time,
philip.s.jones@home.com writes:
> I recall seeing mentioned (at least one) preferred vendor for re-sleeving
> and/or re-building brake master cylinders. I also recall seeing several
> "don't do this!" messages as well. I've failed in searching the archives
> for
> the vendor names; can anyone help me out with the name of a preferred
> vendor?
>
> Secondly, said leaking master cylinder has resulted in paint loosening and
> bubbling on the sheet metal around/under the mounting bracket. Any
> particular
> suggestions for surface prep prior to attempted repair? I was thinking of
> simply cleaning the area with wire brushing and alcohol; and then brushing
> paint on (of the correct color).
- - - - - - - - - - -
Contact White Post Restorations for the best MC re-sleeving job.
www.whitepost.com
The alcohol should clean up the area and remove the brake fluid. Not sure I
agree with the wire brush and painting techniques. I would remove the pedal
box and do a proper job. At least prime it first. Just my 2 pence.
Allen Hefner
SCCA Philly Region Rally Steward
'77 Midget
'75 Midget "The Project"
'92 Mitsubishi Expo LRV Sport
|