spridgets
[Top] [All Lists]

Re: Sag in rear spring.

To: Jim Juhas <james.f.juhas@snet.net>
Subject: Re: Sag in rear spring.
Date: Tue, 31 Jul 2001 18:27:33 -0500
Cc: spridgets list <spridgets@autox.team.net>
References: <3B66D373.124C0D33@snet.net> FILETIME=[6F3F9620:01C11A18]
The easy suggestions are NEVER well received.............

Jim Juhas wrote:

> My wife's 1969 Sprite lists to the left.  I suggested that
> she trim down a bit, but that suggestion was not received
> well.  Following that, I carefully jacked the car at each
> suspension point to get the chassis level.  This was done on
> a drive-on lift.  We determined that the left rear spring
> needs to be compresses a full inch more than the right to
> get the car to level.  All the mounting points seem to match
> from one side to the other as to height above road level.
>
> Trouble is, I replaced these springs about 4 years ago with
> new ones from Moss.  Oh, well.
>
> >From the steps I took, is there any question that the spring
> is bad?
>
> How many leaves are supposed to be on a 1275 Sprite spring?
> I noticed in the catalogs that there are different springs
> for 948/1098, 1275, and 1500.  The ones on the car are five
> leaves.  I have an old rusty set with six leaves.  Are those
> 1500?  Do the spring rates increase as the engine size got
> bigger?
>
> Who is a good source for a replacement spring?



<Prev in Thread] Current Thread [Next in Thread>