I discovered my hubs to be in this condition during the rear end rebuild
last winter. Loctite makes a very effective product for bearings, actually
just a high strength crazy glue, with 4000 lb shearing strength. Those
bearings are in there really good now, I'm just not sure how easily they
will come out when I want them to......
Doug Ingram
Victoria BC
1958 Sprite (AN5L/636)
1963 Sprite Mk II project (HAN7L/30003)
----- Original Message -----
From <WEricars at aol.com>
To: <billh@aaai.com>; <spridgets@autox.team.net>
Sent: Monday, July 16, 2001 8:57 PM
Subject: Re: DPO repairs
> With respect to the rear bearings, you should check both the bearings and
the
> hubs themselves for excess wear. The hubs themselves will wear out and
not
> be able to hold the bearing.
|