Have you checked your vacumn advance? I had a weber years ago that was very
sensitive to the advance. Had a leak in the vacumn line and it wouldn't run
worth a damn.
Kent
Subject: Weber issues
> I'm trying to cure the off idle flat spot on my 62 Sprite. I yanked out my
> 40DCOE yesterday to check it out to go through it and see if I can make
some
> changes to cure this problem. I need to correct this as it's pretty much
> undriveable in traffic. As soon as I dip into the throttle it stalls and
> sometimes dies completely. I've tried to be as light as possible on the
> throttle but it still does it. Any ideas as to which direction I should
> take.
> Herby
|