Tommy -
How are you going to change from pull to push? Bellcrank?
Clay L.
67 Sprite
At 05:01 PM 7/9/01 -0400, Tommy_Samuels@markivauto.com wrote:
>So after all of the discussions, can anyone tell me how far the fork
>travels at
>the slave cylinder?
>It should be very easy to fabricate a bracket that mounts to the tranny
>I can drill a hole in the pedal box to accept the terminal end of the
>cable and
>adjustment would be via a nut welded to pedal box
>The cable will attach to the clutch pedal
>
>My only concern is will I generate too much travel at the fork?
>Is there such a thing as too much travel?
|