Re: Thanks to the list and progress on Sprite

In a message dated 6/14/2001 1:37:01 AM Eastern Daylight Time, 
BritishCarMan@aol.com writes:


> alot of primer in a can and strip down the 
> good metal and primer it over for now. 

Jamie:

If you are doing this to protect it from rust, the primer is like a sponge.  
Especially if the car is going to be outside, you would be best using a spray 
can of paint rather than primer, unless it is epoxy primer.  Then strip the 
paint off before you do the final finish.

---David C.