bill,
why use a unisync? you can synchronise the carbs with a piece of 1/2" or
5/8" heater hose. just listen to the pitch of the air being drawn through
the hose as you adjust the carbs. switch the hose back and forth between
the 2 carbs and you will be finished when they "sound" the same. once you
have done it this way , buying the tool seems a bit silly! of course
watching a gauge works quite well when you can not hear very
well...............lol!
chuck.
///
/// (If they are dupes, this trailer may also catch them.)
|