With the risk of warping an expensive aluminum head that is already more
prone to warping, I would definitely un-torque the whole shebang and take
advantage of the chance to check under the head. Why pass up the chance to
find all sorts of budget breaking little problems?
Regards,
Glen Byrns
'59 bugeye
'59 Morris Traveller (Winifred)
----- Original Message -----
From "Larry Miller" <millerls at ado13.com>
To: "Bugeye Group" <bugeye@egroups.com>; "Spridgets"
<spridgets@autox.team.net>
Sent: Wednesday, January 31, 2001 10:27 AM
Subject: Re: Rockers And Head Nuts (Sounds Like a Punk Rock Band)
> Forgot to mention that I have an aluminum head.
>
> Larry Miller
>
> ----- Original Message -----
> From: "Larry Miller" <millerls@ado13.com>
> To: "Bugeye Group" <bugeye@egroups.com>; "Spridgets"
> <spridgets@autox.team.net>
> Sent: Wednesday, January 31, 2001 9:12 AM
> Subject: Rockers And Head Nuts (Sounds Like a Punk Rock Band)
>
>
> > When removing the rockers, is it necessary to loosen all of the head
nuts?
> >
> > Any danger of warping the head if only those holding the rockers are
> > removed?
> >
> > Larry Miller
> > http://www.ado13.com
|