Daniel1312@aol.com wrote:
> Thanks for your reply. Can you confirm that the manifolds from Mk2 - Mk4
> Spitfire are all the same and will the 1500 Midget (obligatory MG content).
Yes, all the same.
> Also I guess the twin HS2 Spitfire 'hop up' replaces a single 1.5" stromberg?
Yes. Although again, if you are paying to buy a set of carbs, go
for the proper HS4 carbs for the engine. Even by factory definition
the HS2s are "too small".
If you have a set of HS2s around, slap them on, but proper HS4s
won't cost anymore and flow a lot more air. They are also factory-spec
so needle selection is simple and well documented.
> If so, is the Spitfire single stromberg manifold the same as the one on the
> 1500 Midget
Yes.
> Finally is the stud hole pattern on the 1.5" Stromberg the same
> as a HS4?
No.
--
Trevor Boicey, P. Eng.
Ottawa, Canada, tboicey@brit.ca
ICQ #17432933 http://www.brit.ca/~tboicey/
How do you price the most desirable example of an undesirable item?
|