One from a "B" should fit. Look at Ed's site....... www.justbrits.com...... He
has a driving lights page that shows a dash for the 66 B and it has the "T"
handle choke in it. Check and see if it is similar to yours............. To
change, all you need is a 9/16 open end wrench, a screwdriver to take the
cable loose from the carbs, and a large supply of cuss words when something
goes wrong (trust me, it will) Best of luck........... Brad
SAUTHOFF PATRICIA JEAN wrote:
> Ok, well I did try turning it, but that didn't do anything. I wasn't sure
> if it was supposed to. I know the heater knob does, but I haven't figured
> out if anything actually happens when it's turned, and I'm afraid of
> breaking it so I usually just leave it alone :). Is it hard to replace
> with the locking kind? I know there's a stash of those in my house
> somewhere (if the one's from a B will fit).
>
> Patricia
>
> On Sat, 18 Nov 2000, Frank Clarici wrote:
>
> > SAUTHOFF PATRICIA JEAN wrote:
> > > (I now understand the lock on a B choke!) What can I do
> > > to stop this from happening? (aside from wedging something behind it,
> > > which would probably just pop out and poke me in the eye).
> >
> > Patricia
> >
> > Take a clothes pin and clamp it to the cable just behind the knob.
> > Sprites, up to 67 never had a locking choke.
> > Of course, if originality is not a big issue, the later locking choke
> > cables work well.
> > I prefer the "T" type myself.
> > --
> > Frank Clarici
> > Toms River, NJ
> > The bug in the rice bowl
> > http://www.exit109.com/~spritenut
|