I would recommend getting some decent bolts or even cap screws/allen bolts -
there are a lot of engineering or race shop companies that are sure to be
able to supply decent bolts. With an old bolt you never know who fatigued it
is and running a die over them can make things worse.
My two pence.
Daniel1312
In a message dated 11/04/00 04:04:05 GMT Daylight Time, DLancer7676@cs.com
writes:
<< Lacking anything else, I have 4
used bolts that look pretty good--I have run a die over them to clean them
up. >>
|