The A terminal of voltage regulater to starter solenoid?
Paul
PAsgeirsson@juno.com
On Mon, 27 Mar 2000 17:22:03 EST Ajhsys@aol.com writes:
>I had a very short (sic!) amount of time to work on replacing my fuse
>box on
>Sunday. Got it all in, but still have to drill new holes for the
>mounting
>screws when I ran outta time. I am installing a new Littelfuse ATO
>fuse box.
> It takes 5 spade fuses, so I will have one extra circuit.
>
>A few weeks ago my wipers, tach, and fuel gauge stopped working. I
>figured
>it was something I touched in the radio console, because that was the
>last
>place I worked. I couldn't find any problems behind the radio, so I
>started
>replacing the fuse box. As a test, (since all the fuses are
>definitely
>good), I twisted the fuse for the non-functioning items. They worked.
> Rust
>on the fuse terminals! (Now I feel stupid!) The simple things should
>ALWAYS
>be checked first.
>
>Now for my question. The bottom two fuses on the '77 Midget are for
>the
>lights, left side and right side. All of the light wires are red.
>One of
>the fuse terminals has a brown w/ white tracer wire coming off of it.
>This
>looks like an original wire because it goes into the original wire
>harness
>(blue tape, lot of dirt) and then the harness goes thru the firewall.
>I
>wasn't able to find where it comes out of the harness after about 15
>minutes
>upside-down under the dash. It is not on my wiring diagram for that
>fuse.
>
>I can't find a brown/white wire any where in the Bentley manual wiring
>
>diagram (indicated on the diagram as NW). Does anybody know what the
>brown/white wire is for? After I finish the new fuse box, I will
>disconnect
>it and see what stops, but curiosity is tough to put up with for
>another week.
>
>Allen Hefner
>SCCA Philly Region Rally Steward
>'77 Midget
>'92 Mitsubishi Expo LRV Sport
http://dl.www.juno.com/get/tagj.
|