spridgets
[Top] [All Lists]

Re: Bad fuel hoses from MOSS??

To: Wiedemeyer <boxweed@thebest.net>
Subject: Re: Bad fuel hoses from MOSS??
Date: Tue, 07 Mar 2000 14:36:36 -0500
Cc: Larry Miller <millerls@ado13.com>, spridgets list <spridgets@autox.team.net>
References: <00f001bf8859$ef4979a0$ac7b503f@default>
www.summitracing.com

Wiedemeyer wrote:
> 
> How do we get ahold of Summit to order this gas line?  Anybody got an e-mail
> address, or is this a walk-in place like Auto Zone?
> 
> Thanks,
> Bob
> -----Original Message-----
> From: Larry Miller <millerls@ado13.com>
> To: Spridgets <spridgets@autox.team.net>
> Date: Tuesday, March 07, 2000 11:34 AM
> Subject: Re: Bad fuel hoses from MOSS??
> 
> >Summit has a very nice super quality braided gas line in 1/4, 5/16, or 3/8.
> >$7.50 for 3 feet, $13.95 for 6 feet, $22.95 for 10 feet. MBTE will not eat
> >it. Very good stuff.
> >
> >Larry Miller
> >
> >----- Original Message -----
> >From: <DLancer7676@cs.com>
> >To: <endicott@nashville.com>; <Bryan.Vandiver@Eng.Sun.COM>;
> ><spridgets@autox.team.net>
> >Sent: Tuesday, March 07, 2000 3:16 AM
> >Subject: Re: Bad fuel hoses from MOSS??
> >
> >
> >> In a message dated 3/6/2000 11:47:51 PM Eastern Standard Time,
> >> endicott@nashville.com writes:
> >>
> >> << I found a solution to the outrageous price and poor quality of the
> fuel
> >>  lines available from Moss and others.  I bought good quality 1/4 fuel
> >line
> >>  from the parts store for about 50 cents a foot.  Then a trip to Home
> >Depot
> >>  where I  found stainless braided plumbing hose, cut the ends off and
> >slide
> >>  to braid off the hose.  Throw the hose away and now you have a few feet
> >of
> >>  shiny stainless braid.  Push the braid together and slide it over the
> >hose,
> >>  a little shrink tube on the ends and you are done.  Besides being
> >stainless
> >>  the weave is much tighter than the original stuff and you will know what
> >is
> >>  inside where it counts.  See, Frank isn't the only cheap one on the
> list!
> >>   >>
> >>
> >>
> >> Hear, hear, Mark!!  Good Job!!!
> >>
> >> --David C.
> >>

<Prev in Thread] Current Thread [Next in Thread>