I have not measured the final outcome, but I installed an aluminum plate
about 3/8" thick underneath my lever shocks. this also increases the
negative camber. I am running both the offset trunion bushing (got mine
from Mini Mania) and the camber plates. You can visually see the negative
camber when you look at the wheels. Car has a better on center feel and
wanders less.
David Riker
74 Midget
78 Midget
63 Falcon
http://personalweb.sunset.net/~davidr
----- Original Message -----
From Matthew P Johnson <spriteguy at juno.com>
To: <spridgets@autox.team.net>
Sent: Wednesday, January 26, 2000 10:09 AM
Subject: Negative Camber
> I am using an offset trunion bushing kit from Rivergate. This has
> resulted in about 1/2 degree of negative camber. According to the tire
> temps taken at the autox, the car needs more negative camber.
>
> I am curious to know: Has anyone tried other methods to increase
> negative camber and how successful the was the method?
>
> Thanks,
> Matt
> http://dl.www.juno.com/get/tagj.
>
|