It'll sure help. In my engine, the valve was a little
too generous at idle, so I had to crimp it down quite
a bit. Otherwise, works fine.
--- Greg Gowins <cartman@dnai.com> wrote:
> Hello fellow listers,
>
> I've gone back into the archives and done some
> researching on the NAPA
> #2-9254 PCV valve. I'm picking one up tomorrow, as
> I feel I've donated
> enough oil to the ecosystems of California and Texas
> with my very generous
> Sprite. I've read about how different people have
> plumbed theirs. I think
> I'm going to go the simple route, and just run it
> straight from the intake
> manifold to the timing cover canister. I've got a
> newer valve cover, and it
> doesn't have any spots to hook up plumbing. Will
> this be enough to stop the
> oil leak, or at least cut it down a great deal? Any
> words of advice would
> be much appreciated. Thanks!
>
> Greg Gowins
> '69 Sprite
> Dublin, CA
>
>
=====
Ron Soave
"A Fool and His Money Can Throw One Hell of a Party"
1960 Bugeye
1972 BGT
|