In a message dated 10/9/99 12:11:25 AM Eastern Daylight Time,
brent.wolf@gte.net writes:
<< Quick question - Where is the back chain attached to pull the engine from a
76 Midget? The front bracket is attached, but nothing in the rear.
>>
Brent:
Opinions will vary, but I liked the rear exhaust manifold bolt. Going
between that and the generator bracket bolt in front gave it a nice balance,
and I thought it was safe enough. Some say to bolt it to the valve cover
bolts, but that exerts a straight up pull and I have heard at least one
account of that one coming loose.
The job is also a lot easier if you have a leveler, especially if you are
pulling the tranny with the engine.
==David C.
|