you can also order Amstrong shock fuild specifically from (Moss,VB,etc)
- Bryan Vandiver (59-bugeye)
San Jose, CA
>X-Originating-IP: [203.101.52.30]
>To: carolien@coastalnet.com
>Cc: spridgets@autox.team.net
>Subject: Re: shock absorbers
>Mime-Version: 1.0
>
>Caroline,
>My 'Caltex lubrication and tune up manual' specifies auto trans fluid, which
>at first seemed odd, but when you think about it, it is a hydraulic system
>so ATF makes sense.
>I know there are folks on the list who have experimented with other stuff
>such as motorcycle fork oil.
>Andy
>
>
>>From: "carolien coulter" <carolien@coastalnet.com>
>>Reply-To: "carolien coulter" <carolien@coastalnet.com>
>>To: "majordome" <spridgets@autox.team.net>
>>Subject: shock absorbers
>>Date: Wed, 18 Aug 1999 20:04:40 -0700
>>
>>Hi everyone,
>>There was a string on this not too long ago but I forgot . What should I
>>use
>>in the shock absorbers as far as fluid is concerned?I also don't know what
>>is in there now. Does it matter if I would mix this unknown fluid with the
>>fluid I should use.Thanks, Carol '59 Bugeye
>>
>
>
|