I believe that both the bugeye, and MarkII use the same gauges, is that
correct??, If
so, I may have an extra speedo available soon. (got three coming in the mail
from eBay)
Regards,
Bryan Vandiver
San Jose, CA
>Subject: Re: Correct gauge # '62 MKII Sprite
>To: Dave.Vrba@am.sony.com, spridgets@autox.team.net
>MIME-Version: 1.0
>
>Greetings Dave and list,
>The correct gauges for the 62 AN6 MKII is as follows:
>Speedo: BMC # BHA 4210....Smiths # RN 6126/00
>Tach: BMC# BHA 4213.......Smiths# RN 2313/00
>
>The speedo and tach both have black faces with a silver center. Both have
>white lettering. The speedo goes to 100mph.
>The tach goes from 0-60; and has printed << x 100 3-1
>The speedo should have a translucent blue plastic lens which illuminates when
>the high beam is on. It is diamond cut.
>The speedo has a similar plastic lens except it's red. THis is for ignition.
>Hope this helps
>
>George Marinos
>Sprite MKII AN6
>supercharged
>glen rock, nj
|