At 03:28 PM 4/24/99 -0400, you wrote:
>OK, still got the noise.
>
>I have Champion RN9YC plugs (resistor plugs, right?)
>I have copper core (non-resistor) wires
>I ran a direct ground from the radio ground wire to
> the battery neg terminal
>
>I still get statis -- ignition noise -- crackling that
>increases with rpms
>
>Should I:
>
>A. Get resistor wires -- will they work in the dizzy cap
Chuck,
Your radio noise scenario sounds just like what we went through.
RN9YC plugs helped, but some noise was still present. I then installed some
7mm silicone wires into our side entry cap and most noise was eliminated.
The wires were a big improvement...and since ours is a daily driver
potential performance loss was not a concern, and I have not had the
reputed "Champion" failures others have reported.
Hope this helps,
Bill & Cindy
Santa Rosa, CA
98 Sea Ray 190 BR
96 Yellow Lab
94 Ford F150 4x4
91 Tioga Montara
72 Midget parts car
69 Sprite driver
Assorted teen-agers
|