Listers,
Thanks to your earlier help, the driver side shock came out
beautifully. I
didn't even scrape a knuckle.
We know that didn't last.
On to the passenger side. The top trunnion through bolt seems to be
bent. It
also is fused to the metal part of the bushing. I have drowned the whole thing
in penetrating oil. no luck. I have tried a C-clamp and socket to push the pin
through, that bent the bushing "housing". So I'm stuck. Is it time to break
out the hack saw? I assume that I will be replacing the bent bolt anyway.
Thanks for you help.
Don
'72 Midget (in it's natural state, on jack stands)
|