spridgets
[Top] [All Lists]

Re: Bugeye steering wheel

To: "Spridgets" <spridgets@autox.team.net>
Subject: Re: Bugeye steering wheel
From: "Larry Miller" <millerls@ado13.com>
Date: Thu, 21 Jan 1999 14:49:18 -0800
Reply-to: "Larry Miller" <millerls@ado13.com>
Sender: owner-spridgets@autox.team.net
I'm with Rick, Mine does not have a bushing. The parts manual does not show
one.

Larry Miller
-----Original Message-----
From: Rick Kaplan <rkaplan@us.net>
To: Carlson, Rob <rcarlson@csw.com>
Cc: Spridgets <spridgets@autox.team.net>
Date: 21 January, 1999 2:44 PM
Subject: Re: Bugeye steering wheel


>
>
>"Carlson, Rob" wrote:
>
>>         List:
>>
>>         There is a bushing that fits just underneath the steering wheel.
Two
>> questions re this bushing: a) what is it made of and b) does the addition
of
>> this bushing force the steering wheel to set further out?
>>
>>         I ask this because I am trying to figure out why my horn brush
does
>> not fit into the hole in the steering wheel. It appears to be to long --
but
>> if there's a bushing that is missing which may cause the wheel to set out
>> 3/8" or so -- then the brush would probably fit.
>
>Rob:
>
>As far as I know there is no bushing behind the steering wheel.  There is
the
>plastic piece that holds the contact ring, then the wheel, then a keyed
washer.
>I think where the splines end on the steering column shaft should locate
the
>wheel correctly.
>
>You could cut the brush down I suppose.
>
>Rick
>
>



<Prev in Thread] Current Thread [Next in Thread>