Also...In the Spridget fuel tank (at least in mine) there is a little
screen cage on the bottom of the pickup tube. After seeing how close to
the bottom of the tank it was (as it should be) I was hesitant to use any
sealant for fear of clogging up that screen.
Anyone have any experience sealing one of these tanks and it not affecting
the screen?
CTP
At 12:01 PM -0800 1/19/99, Larry Miller wrote:
>What Moss sells is actually a three part process. Cleaner, etcher, and
>sealer. The cleaner is just a heavy duty de-greaser and would not even
>touch the tank I tried it on. Never tried the other two products.
>
>Larry Miller
>-----Original Message-----
>From: Christian Stanton <cstanton@pixley.com>
>To: Spridgets@autox.team.net <Spridgets@autox.team.net>; samesq@pacbell.net
><samesq@pacbell.net>
>Date: 19 January, 1999 11:56 AM
>Subject: Re: fuel tank cleaner
>
>
>>By fuel tank cleaner I assume you mean a two part etchant/sealer product.
>>
>>I used the fuel tank kit from JC Whitney to clean and coat the inside of
>the tank for my '68 Saab. I am very pleased with the results. The etchant
>is just dilute acid (of the type that has been discussed under the RUST
>thread) and the coating is a two part MEK based thick paint. Just make sure
>to blow out the gas pickup and vents with air _before_ this stuff sets up.
>>
>>My guess is that the Moss kit is the same stuff.
>>
>>
|