I don't think Judsons were ever manufactured for the 1275, only the 948 and
1098. Of course, I could be wrong (lord knows I have been in the past!).
Probably can work with a little "tweaking".
George: why didn't you tell me about the Judson list; that's what we pay
you for!
Daniel T.
-----Original Message-----
From: GMari58175@aol.com [SMTP:GMari58175@aol.com]
Sent: Tuesday, December 15, 1998 1:31 PM
To: wsthompson@thicko.com; spridgets@autox.team.net
Subject: Judson update
In a message dated 12/15/98 8:52:52 AM Eastern Standard Time,
wsthompson@thicko.com writes:
<< Keep me posted on your Judson progress... I've got one that I'm hoping
to
plop on a 1275 in a MKIII Sprite. Any reason this wouldn't work?
>>
Hi William,
Will certainly keep you up to date.
My friend Buzz who has a Judson in his 948 bugeye loves it, advised me that
it
took quite a bit of tweeking to get it to run properly. My advise to you
is
the following:
1. Engine must be in good shape inside and out! No compression leaks,
good
valves, etc.
2. Must have good cooling system! Clogged radiator etc, will cause you
nightmares.
3. MOST important!!!!! The Holley carb you are using MUST be the correct
carb for your blower ; and it MUST be calibrated perfectly. I had mine
rebuilt by Pony Carburators in Casenovia, NY. GREAT folks.
Once you get the thing installed, the fun begins. Getting the
timing/ignition
set right is gonna take awhile. Also get yourself a bunch of Holly jets.
Mine currently has a #65 in it. Runs great around town but bogs down,
overheats and pings at highway speed (50-60mph). Leading me to believe
that
it is running lean. So my next project is to increase the size of the jet.
Starting at #68. we'll see and will advise. Best of luck!
PS: Very important that you get yourself a vacume/pressure gauge. This
monitors when the blower is activated. You don't want to be cruising for a
long time with the blower active. It does wonders for the engine!
Oh, one other thing! Absolutely make sure that the inverted oiler is
properly set to lubricate the blower and head sufficiently. It's very easy
to
forget this one very significant detail. Do you have a copy of the Judson
instructions?
I also installed an NOS Judson Electronic Magneto (positive ground). It
works
great and really looks cool too. Are you part of the Judson list? Think
it's:
Judson@autox.team.net
Good luck with yours.
george Marinos
Sprite (almost Supercharged) AN6 MKII
glen rock, nj
|