Its not so much fuel pressure that you are interested in, but fuel flow
rates
(as long as the pressure at the carb is not so high as to cause leaks).
Disconnect the fuel lines and time how long it takes to fill a quart
container.
Mike
-----Original Message-----
From: GMari58175@aol.com <GMari58175@aol.com>
To: spridgets@autox.team.net <spridgets@autox.team.net>
Date: Monday, December 14, 1998 5:18 PM
Subject: Fuel pump pressure
>Greetings 948cc geniuses!
>Preparing for stage 5 of my Judson problem diagnoses.
>How much pressure should the standard bugeye/AN6 fuel pump be generating to
>pump enough fuel into the wonderful single bore Holley downdraft carb?
Some
>of you may tell me to check the bowl; if its got fuel in it, than the pump
is
>working properly. Is this indeed true?
>Thanks for your help.
>
>George Marinos
>sprite MKII AN6
>glen rock, nj
>
|