Hello All
In the process of my rebuild I had made the decision to eliminate the PCV
valve. However, back in November there was a thread regarding PCV valves
and Drippy 1275's. Ron Soave noted that he had used a PCV valve (2-9254
from Napa) with great success. Well, Nina or Nino or some other beautiful
latin lady is being wonderful to Calgary again as we have +14 celcius today
(on a Sunday not mid week - imagine that) so I zipped down to the Napa
store, picked up a valve and some hose and put it in.
I am very happy to report that after a brisk run there is not a drop to be
seen where previously I was to the point of contemplating a permanent oil
recycling tank under my engine!
Thanks to Ron and all other Spridgeteers who make this list a wealth of
great info.
dave
'72 MKIII
|