Drew,
You will need to check that your A-arms are the later type with the
holes pre-drilled for the sway bar mounts otherwise you will have to
drill them. I have heard that the later type A-arms are stronger than
the early ones that do not have the holes drilled but I have not seen
any proof.
Regards,
Peter.
>
>On Thu, 24 Sep 1998, Andrew Griffith wrote:
>
>> Hello again,
>> I'm also shopping for a front sway bar for my '62 MK2 Sprite and I'm
>> wondering about the size vs. cost considerations. Currently the car
>> doesn't have one at all.
>> I've seen a few people and salvage yards selling the used factory
=BD"
>> ones from $25 to $5, but could these be tired and worn out? Do these
>> bars wear out?
>> If I spend the money and buy a new thicker one, =BE or 7/8", what
>> difference could I expect from slightly aggressively road driving
over a
>> used =BD" bar?
>> I would expect that I will see a big difference from no bar at all to
>> any size bar, but are the new ones worth it if I'm not racing on a
>> track?=20
>> As always your advice is always appreciated,
>> Drew
|