Hi there listers:
I received my new sway bar in the mail yesterday but it didn't contain
the bolts which mount the bar to the frame via the squarish buffer
brackets.
Does anyone know the bolt size for these 4 bolts? I suspect they are
9/16" fine or something close, but haven't had any luck determining the
exact bolt size.
Also, for mounting the brackets to the A-Arms, I wanted to get the
strongest bolts available, so I bought stainless steel
bolts/washers/nuts for this. Do you all think that this will work okay
and do I have to worry about any electrolytic action between the
stainless steel bolts and the regular steel of the A-Arms and the sway
bar mounting braket?
Regards,
Curt
--
Curtis Carlson
'66 Austin Healey Sprite MkIII ("Gerty")
________________________
Research Geographer 612.931.3936 (voice)
Navigation Technologies 612.931.3937 (fax)
5780 Lincoln Dr Ste. 100 612.308.2595 (mobile)
Edina, MN 55436 carlson@navtech.com
|